otput transformers

Welcome and feel free to ask questions about class E, mosfet's, and AM.
You must be registered to post.

otput transformers

Postby gtd » Fri Oct 07, 2005 3:07 am

on the WA1QIX home page about class E PA's it was mentioned that sheilded cable with the sheild used as one conductor and the two inner cables could be used as a transformer without using a ferrite core , has any one tried this and if it did work what kind of dimentions were used. Second question has anyone tried a trifilar wound transformer on a pvc former with any sucess. My interest is 160 metres and a large PA coil does not present an issue.
Posts: 1
Joined: Fri Oct 07, 2005 2:58 am

Postby frank carcia » Tue Oct 11, 2005 11:32 am

Shielded wire as a transformer is only good at VHF / UHF you will need ferrite to keep the size small on 160 to 10 meters. Search the WEB for Motorola app note AN749 on broad band transformers of cebik book on transformers. gfz
frank carcia
Senior Contributer
Posts: 765
Joined: Fri Jan 31, 2003 10:48 am
Location: Enfield Ct. / Niantic Ct.

Return to Class E Discussion

Who is online

Users browsing this forum: No registered users and 0 guests