4 FET Push/Pull Input Circuit

diagrams and such...

4 FET Push/Pull Input Circuit

Postby WA2WVL » Wed Jun 21, 2006 7:53 pm

A 4 FET Push/Pull input circuit schematic.

The link will take you to the Rochester (NY) DX Association website Photo Gallery, Class E Amplifier Schematics section, where you will find a jpeg image of the circuit.

Thanks to RDXA for allowing me to post images on their web site.

http://rdxa.com/index.cfm?page=Photo%20 ... lleryID=26

This input circuit is a 50 ohm input for driving (4) IRFP32N50K FETs on 40 meters. These parts ($6ea) are capable of developing 600-1000 watts PEP in a Class E saturated mode at about 90% efficiency. The output circuit (no shown) is the usual 1:1 transformer followed with a series tuned network matching up to 50 ohms. Driving power is 2-3 watts/FET.
Floyd WA2WVL
Last edited by WA2WVL on Mon Jul 03, 2006 8:42 pm, edited 15 times in total.
WA2WVL
Class E Enthusiast
 
Posts: 167
Joined: Thu Dec 22, 2005 1:40 pm
Location: Homosassa, Fl.

Postby frank carcia » Wed Jun 21, 2006 9:43 pm

floyd,
can't open it would you please mail me a copy
use my home email: carcia@sbcglobal.net
frank carcia
Senior Contributer
 
Posts: 765
Joined: Fri Jan 31, 2003 10:48 am
Location: Enfield Ct. / Niantic Ct.


Return to Schematics

Who is online

Users browsing this forum: No registered users and 1 guest

cron