power supply/generator

diagrams and such...

power supply/generator

Postby ChrisBaldwin » Wed Jul 20, 2005 10:06 am

Does anyone out there have a schematic to create a power supply that will provide an output of 500W, 20KHz, approx 1200V, and that will run from the mains. Chris B :twisted:
ChrisBaldwin
 
Posts: 1
Joined: Wed Jul 20, 2005 9:50 am
Location: Newcastle

FOR WHAT?

Postby N9NEO » Wed Jul 20, 2005 8:24 pm

Not sure what you would use such a thing for.

I would look at a big audio amplifier with a transformer to get voltage up to where ya need it to be. Maybe ferrite would be ok. Core should be limited by saturation, so just wind enough turns to keep flux reasonable and it should not get too hot. Just stick a function generator on input.

To build one of these from stock might be pia.

Other way to do might be class E or F

You should tell what you want it for and how many and so on.
User avatar
N9NEO
Class E Enthusiast
 
Posts: 322
Joined: Tue Apr 08, 2003 11:52 am
Location: Uxbridge MA

Postby WA2WVL » Sat Dec 24, 2005 10:15 pm

Chris Baldwin:

Did you ever get your schematic for the 500watt offline supply?
I saw a good one on the internet and I will hunt it up if you need it.

Floyd WA2WVL
WA2WVL
Class E Enthusiast
 
Posts: 167
Joined: Thu Dec 22, 2005 1:40 pm
Location: Homosassa, Fl.


Return to Schematics

Who is online

Users browsing this forum: No registered users and 1 guest

cron