Nice job on the site here Blaine.
I wonder if anyone has put together a complete parts list for both the RF deck and PS/Modulator. If so, can I get a copy, and if not I'll start going through the schematic and marking one up.
I'll save it to file and list it here if thats OK FINE.
Have a wonderful class "E" weekend.
Bob
Class E AM Forum
This forum is for technical support and general questions about building and operating Class E-AM transmitters.
Parts list
3 posts
• Page 1 of 1
Parts list
by FlatulentHQ » Sat Feb 01, 2003 3:14 pm
- FlatulentHQ
- Posts: 1
- Joined: Sat Feb 01, 2003 2:59 pm
by blaine » Sat Feb 01, 2003 3:24 pm
hey Bob, good to see you here 
i think steve is working on parts list.
check out "parts and sources"
i think steve is working on parts list.
check out "parts and sources"
Blaine N1GTU
"The box said that I needed to have Windows 98 or better...
so I installed Linux." --- LinuxNewbie.org
"The box said that I needed to have Windows 98 or better...
so I installed Linux." --- LinuxNewbie.org
-
blaine - Site Admin
- Posts: 98
- Joined: Fri Jan 31, 2003 1:13 am
- Location: CT
by Glenn K2KL » Fri Feb 14, 2003 10:02 am
Hi Bob;
I'm working on a parts list for the combination Power Supply / Class-H modulator unit I'm building. I'm using Steve's design and the KD1J pc board set. I'm entering it in an excel spreadsheet but I'll probably make a PDF file out of it before listing it here.
I'm working on a parts list for the combination Power Supply / Class-H modulator unit I'm building. I'm using Steve's design and the KD1J pc board set. I'm entering it in an excel spreadsheet but I'll probably make a PDF file out of it before listing it here.
Glenn K2KL
-
Glenn K2KL - Member
- Posts: 37
- Joined: Sat Feb 01, 2003 3:05 pm
- Location: Monsey, NY
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest