Quality of LP filters for PWM - for audio performance

Welcome and feel free to ask questions about class E, mosfet's, and AM.
You must be registered to post.

Quality of LP filters for PWM - for audio performance

Postby John K5PRO » Tue Oct 05, 2004 6:31 pm

Maybe its been posted here before. Jim Tonnes (formerly of Collins Broadcast) has some useful software and analysis of low pass filters used in PWM audio amplifiers for broadcast/amateur modulators.

http://mywebpages.comcast.net/tonne/app ... wmham.html

His main website has software and other tips. Its at:

http://mywebpages.comcast.net/tonne/index.html
John K5PRO
Member
 
Posts: 19
Joined: Tue Oct 05, 2004 6:20 pm
Location: Santa Fe County, NM

Postby frank carcia » Wed Oct 06, 2004 8:28 am

John,
Very Good find. Notice the corner of the first filter section is a lot lower than the second. Also the first inductor is larger than the second. fc
frank carcia
Senior Contributer
 
Posts: 765
Joined: Fri Jan 31, 2003 10:48 am
Location: Enfield Ct. / Niantic Ct.

Postby ke1gf » Fri Oct 08, 2004 7:29 am

John,

There are lots of good points in this page that you posted.

I'm wondering if Blaine could make the page sticky, understanding jim's stuff would be a great help to the PWM beginner.

I downloaded Elsie a few weeks ago, it doesn't seem to want to run on my WinXP,SP2 machine but runs OKFINE on the WIN98 box, haven't tried it yet under WINE.

Speaking of WINE, SWCADIII runs good under it.

-Bill
User avatar
ke1gf
Young Brainiac
 
Posts: 229
Joined: Mon Feb 03, 2003 11:38 am

Yes, good paper.

Postby N9NEO » Thu Nov 25, 2004 5:12 pm

I just had an interesting email volley with Jim T. He is putting some rigs together to get back on the bands. Hope he stops by here. He would be a good contributor.

Below are links to more of his app notes and also some cool software.

73
Bob

http://mywebpages.comcast.net/tonne/appnotes.html

http://tonnesoftware.com/
User avatar
N9NEO
Class E Enthusiast
 
Posts: 322
Joined: Tue Apr 08, 2003 11:52 am
Location: Uxbridge MA

Re: Quality of LP filters for PWM - for audio performance

Postby Brian K1LI » Wed Apr 16, 2014 5:19 pm

I found Jim's note at the end of his paper, re: scaling the filter's input and output impedances, to be somewhat cryptic. A freeware program called AADE Filter Design allows the designer to explicitly set the filter's input and output terminating impedances. I validated my design by porting it to LTSpice and to Elsie.

See http://www.aade.com/filter.htm
Brian K1LI
Member
 
Posts: 15
Joined: Fri Nov 22, 2013 5:14 am


Return to Class E Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron