Experience with "Caltech" Class E PAs?

Welcome and feel free to ask questions about class E, mosfet's, and AM.
You must be registered to post.

Experience with "Caltech" Class E PAs?

Postby Brian K1LI » Wed Apr 09, 2014 7:50 am

Dave Rutledge and his students at Caltech have published numerous articles on some very interesting Class E PA designs.

Does anyone have any experience with these units? Boards for the amps described in QST were available at one time, but no longer. I'd like to have the PCB artwork or some photos so I could produce one myself.

Thanks -- Brian K1LI
Brian K1LI
Member
 
Posts: 15
Joined: Fri Nov 22, 2013 5:14 am

Re: Experience with "Caltech" Class E PAs?

Postby Gilly » Fri Apr 11, 2014 11:42 pm

Hi Brian

Have never made the TX but could be a fun project.....

This here is a good read http://www.its.caltech.edu/~mmic/reshpubindex/papers/QST.pdf

The PCB would be easy to make up using a Dremel Tool or something similar......

The FET will get hot so a good Heatsink would be required....also a Variac controlling the Drain Voltage would be nice too.....


Wayne
Gilly
Class E Enthusiast
 
Posts: 167
Joined: Tue May 15, 2007 6:59 pm
Location: Mt.Eliza Victoria Australia

Re: Experience with "Caltech" Class E PAs?

Postby kf1z » Sun Apr 20, 2014 12:32 pm

Actually, there was something pretty flawed in the caltech documents....

I can't remember what it was, but I remember possibly Steve, QIX commenting on that several years ago.
User avatar
kf1z
Senior Contributer
 
Posts: 558
Joined: Sat Mar 18, 2006 7:07 am
Location: Ely, NV.

Re: Experience with "Caltech" Class E PAs?

Postby Diego-CX4DI » Sun Apr 27, 2014 4:01 pm

Dears,

I just experiment the Caltech Class E circuit in 7Mhz and 10Mhz some year ago and work very good as CW amplifier. Very recommended!

best 73's
Diego
CX4DI
Class E with PWM modulation
Diego-CX4DI
Member
 
Posts: 43
Joined: Fri Sep 30, 2005 10:22 am
Location: Montevideo-Uruguay

Re: Experience with "Caltech" Class E PAs?

Postby steve_qix » Thu Dec 31, 2015 9:07 pm

The main problem is a complete lack of headroom. Everything is run right to the edge.
Visit the class E web site at:

http://www.classeradio.com
User avatar
steve_qix
Class E Guru
 
Posts: 434
Joined: Fri Jan 31, 2003 11:03 am
Location: Townsend MA


Return to Class E Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron